Targeted processing of work pieces
with vapour blasting systems by SIGG
The machine types based on vapour blasting by SIGG Strahltechnik make targeted blasting of work pieces possible. Standard vapour blasting systems are available in various sizes (800 mm – 1400 mm) and in two different versions: Either with a side channel blower or optionally with a platform.
Vapour blasting systems for large work pieces
Even work pieces of relatively large dimensions, not suitable for shot-blasting wheel systems due to their shape (complicated constructs) or their type (permanently installed, not transportable constructs), can well and easily be processed with vapour blasting systems. This procedure applies to wet as well as dry blasting processes.
Dry blasting process with all commonly used blasting materials
During the process of vapour blasting, the blasting abrasive located in a pressure vessel is conveyed to the pistol nozzle by compressed air. Situated at the bottom of the vessel hopper is the chamber used for adjusting the blasting abrasive compressed-air mixture.
Out of the sealed vessel the blasting abrasive is added to the compressed-air stream and accelerated in the blasting hose. Once the overpressure in the vessel is the same as in the compressed-air line, the blasting abrasive can be interspersed without any counter pressure. The acceleration path of the blasting abrasive equals the length of the blasting hose, thus, several meters long. This results in a muzzle velocity of ca. 40m/sec., so that with the use of a pressure machine remarkable area outputs can be achieved. Would you like to learn more about the various possibilities related to vapour blasting, vapour blasting systems and the dry blasting process? Then we look forward to your call or your mail. info(at)sigg-strahltechnik(dot)de